|
Friday, 25 January 2008 |
LED Pavement Stone
With the brand new luminous cobble-stone you can make constructive dreams true. This shining signpost you can even use for more than sett classical pavements, but also in stepstones, in the garden, as part of a fountain and much more it can be integrated easily. Because of its 12V LED technology and weatherproofed materials it can be used really everywhere, interior and exterior. The LED technology allows unremovable integration of the light in the clear resinbody of the "stone". The LEDs used for the "stone" have a life expectancy of 100.000 hours. When you use it 8 hrs. daily the "stones" will even shine after 35 years. * garden decoration * walkway edge * drive-way * pool edge * restaurant, bar terrace * street pavement The available colours are: pole-white, amparo-blue, emerald-green, scarlet-red and sundance-yellow. The cableconnections should be arranged by an experienced electrician to guarantee a full protection from oxidation. All power supplying cables must be laid in the sandbed before paving. The open ends should be located right where you plan the lighting stone placed. Please use cable suitable for "in earth" only! Take care that the luminous paving-stones get no direct contact with the other stones around of them and the cable from the Wisdom must be placed vertical in the ground. The work on the Wisdom is possible by hand only, it is not constructed to bear hard mechanical power from different mashines used for flatten the ready paving. To give static resistance to the LED paving-stones they must be paved in bed of cement (also the gaps two or three rows around). After that work is done you can walk over, drive over with light weight vehicles (limousine) and you already created an anit-theft device with it. Specifications | Power | 0.7 W | | Current | 20 mA or 60 mA | | IP rating | IP 68 | Ordering Codes
|
|
Last Updated ( Friday, 25 January 2008 )
|